Energy saving with the booster compressor
When the air pressure of a production machine, the device is not enough, I recommend the introduction of the booster compressor without building more zooshiben and compressors.
Conventional solution
●I build more compressors
| ●I build more zooshiben
|
A production machine, a device have zooshiben.
(lucky at the time of maker shipment) ↓ Performance of zooshiben declines over time. ↓ zooshiben where performance fell into wastes compressed air more. ↓ Air pressure of the whole production factory falls. ↓ I build more compressors without noticing existence of zooshiben | zooshiben is effective zooshishudan, but the main compressor exhausts compressed air for drive (throw it away) and is.
In addition, the displacement volume increases more when I become obsolete. |
Solution with the booster compressor
I can operate the booster compressor efficiently without throwing away zooshiji, compressed air without wasting the compressed air of the main compressor and contribute to energy saving.
Oil-free booster compressor (product made by ANEST IWATA)
Characteristic of the oil-free booster of ANEST IWATA
The booster compressor breathes in compressed air (nitrogen gas) and is a compressor to up-convert for higher pressure.
The ANEST IWATA booster compressor can supply high-quality air to a use in disfavor with an oil content easily.
1.Oil-free type world's first with the booster
2.The extensive use pressure vs. employing means suited to the occasion
(a customer can be configured by an option in 0.7 - 1.4MPa range)
3.Long maintenance
(※ overhaul-free for body four years)
4.Silent package type
5.High compression efficiency (more than a refueling type and the same class)
2.The extensive use pressure vs. employing means suited to the occasion
(a customer can be configured by an option in 0.7 - 1.4MPa range)
3.Long maintenance
(※ overhaul-free for body four years)
4.Silent package type
5.High compression efficiency (more than a refueling type and the same class)
Characteristic of the 3.0MPa booster
1.A silent package type (56dB).
I reduce the noise of the setting workshop by the low noise, the low vibration only by the package. The refined simple package design does not choose the setting place.
2. Extensive use pressure correspondence is possible
I can control necessary pressure useless upward pressure more than it and am energy saving to be able to set the pressure that a customer is required in nyukioshiryoku - 3.0MPa range optionally.
3.Control is plurally easy
Control is plurally enabled, and the correspondence to a large-capacity use is possible.
It is most suitable for the use that large-capacity high pressure air (nitrogen gas) including the resin blow molding is needed.
2. Extensive use pressure correspondence is possible
I can control necessary pressure useless upward pressure more than it and am energy saving to be able to set the pressure that a customer is required in nyukioshiryoku - 3.0MPa range optionally.
3.Control is plurally easy
Control is plurally enabled, and the correspondence to a large-capacity use is possible.
It is most suitable for the use that large-capacity high pressure air (nitrogen gas) including the resin blow molding is needed.
Characteristic of the oil-free small size booster
※The product specification mentioned above is data as of July, 2008. Please note that specifications, the production situation of the product may be changed without a notice.