Homepage of the T-MEX CORPORATION

Rating capacity

4.903kN{500kgf} - 490.3kN{50tf}

I permit it and overload it

150%R.C.

4-20mA

I overload a limit

200%R.C.

The rating output

2mV/V±0.002mV/V

11.5V: 150Ωmax.
24V: 500Ωmax.

Precision

0.04%R.O.

Less than ± 0.5%R.C.

Creep

0.03%R.O./20min

Less than ± 0.5%R.C.

Zero return

0.03%R.O./20min

Less than ± 3.0%R.C.
(- 20-100 degrees)

Temperature cover

-10 degrees to 50 degrees

-20-100 degrees
(dew condensation, freezing impossibility)

Allowable temperature range

-20 degrees to 70 degrees

-40-100 degrees
(dew condensation, freezing impossibility)

0 points of temperature influence

0.028%R.O./10 degree

Temperature influence of the output

0.03%LOAD/10 degree

Cable

Is with φ 7, 4 core shields, a 5m connection, tip Yanagi Line (CC010-5T - 50T:10m)

Protection class

IP68

Model

TGE-10kN

TGE-5kN

TGE-1kN

TGE-500N

TGE-200N

Examination measurement of the force range note 1)

0.1Nto10kN

0.1Nto5kN

0.1Nto1kN

0.1Nto500N

0.1Nto200N

Examination measurement of the force precision

With pulling, compression, the bending test in the range of 1/1-1/500 of the road cell capacity
Less than ±1% (the = JIS 0.5 grade that produces the high-precision article within ±0.5% of the instructions level by separate sale) of the instructions level

4-20mA

Conformity standard

First grade or 0.5 grade of JIS B 7721, class 1 of ISO7500-1
Or it is 0.5, grade of BS 1610 or 0.5, ASTM E4, class 1 of DIN 5122

420 (with a lead screw protective cover)

Crosshead stroke
(mm)

1100 (as for the maximum installation distance 1180)

Less than ± 0.5%R.C.

Pulling stroke
(mm)

Cross-head speed
(mm/min)

0.1, 0.5, 1to500 (it can be configured by 1mm/min pace during this period)

Less than ± 3.0%R.C.
(- 20-100 degrees)

Cross-head speed

Either big value of ±0.5% of the precision setting speed or ± 0.0025mm/min

-20-100 degrees
(dew condensation, freezing impossibility)

Speed-setting method

Manual operation: I input a number with an operation panel (it can be configured by 0.1, 0.5, 1 - 500mm/min pace),
A use of PC: I am automatically set by the examination condition that I made

Manual speed

3 speed of H/M/L, each speed are configurable optionally

-40-100 degrees
(dew condensation, freezing impossibility)

Examination mode

A single, the For Sale according to the cycle (examination power, pair of the position): Creep, automatic load

Indication

Function attached to the standard

Road cell capacity: Automatic distinction, a road cell span: I pull it and compress it and automatically set it,
A road cell zero point: A one push, position reset: One push,
Movement at the time of the sample break detection: I choose a stop, inversion, one of the disregard,
Break detectivity: Any 0.1% - 9.9% of examination powers setting,
An examination condition registration function: 10 conditions,
An examination power, position analog output: DC0toDC5V (belonging to a scaling function),
Communication facility: USB interface 2.0/1.1 standard conformity, B type connector

External form dimensions (WxHxD)
(mm)

660x1581x503 (I do not include a level adjuster)

Mass

About 80 kg

Power supply voltage, frequency/
Power consumption

Single phase AC100Vto 15V, 50/60Hz/500VA

Use temperature humidity range

Temperature 5 degrees Celsius to40 ℃, humidity 20%to80%RH (thing without the dew condensation)